Skip to content
GeoEQ · Geotechnical software research lab · University of Utah

GeoEQ DEM · Discrete element modelling

GeoEQ DEM: discrete element modelling software for soils and granular materials

Particle-scale simulation of soils and granular materials, starting in 2D with 3D in development.

What it is

Model how soils behave, one particle at a time.

GeoEQ DEM is discrete element modelling software for soils and granular materials; the 2D version is releasing soon and a 3D version is in development.

2D releasing soon 3D in development Desktop · Geotechnical focus

It is built for geotechnical researchers, graduate students and engineers studying granular behaviour, and it is part of the GeoEQ software from the GeoEQ research lab, alongside GeoEQ SPT Logs for borehole logging.

A note on the abbreviation. DEM here means the discrete element method, a particle simulation technique. It is not a digital elevation model, which is a different kind of dataset that shares the abbreviation.

The method

What is the discrete element method?

Definition

Discrete element modelling (DEM) is a numerical method that represents a soil or granular material as an assembly of individual particles, tracks the contacts between them, and integrates their motion over time, so that the behaviour of the whole assembly emerges from particle-scale interactions.

Where it comes from

The method was introduced for granular assemblies by Peter Cundall and Otto Strack in “A discrete numerical model for granular assemblies”, Géotechnique 29(1): 47–65 (1979), doi:10.1680/geot.1979.29.1.47. It originated in soil mechanics, and the standard geomechanics reference is C. O’Sullivan, Particulate Discrete Element Modelling: A Geomechanics Perspective (Spon Press, 2011). The US spelling, discrete element modeling, refers to the same method.

How a simulation works

Every DEM simulation repeats the same cycle in small time steps. The generic steps are:

  1. Detect contacts. Find which particles touch, or overlap slightly.
  2. Compute contact forces. A contact law converts the relative motion at each contact into normal and tangential forces. Which law is used is a modelling choice.
  3. Apply Newton’s second law. Sum the forces and moments on each particle and integrate to update accelerations, velocities and positions.
  4. Repeat. The stress, strain and fabric of the assembly are then measured from the particles and contacts.

Discrete element and distinct element

“Discrete element method” and “distinct element method” are used for the same family of particle-based methods, and some vendors use “distinct-element” in product names. Some authors keep “distinct” for the deformable-block formulation used in rock mechanics; the exact usage varies by author.

DEM in geotechnical engineering

What discrete element modelling is used for in soils.

These are uses of DEM in general, drawn from the research literature on granular materials. They describe the method, not a feature list for any one program.

01Element test

Triaxial compression

A particle assembly is confined through boundaries and loaded axially while deviator stress and volumetric strain are recorded, giving a stress-strain curve to compare with a laboratory test.

02Element test

Direct shear

Particles in a shear box are loaded under a normal stress and sheared along a prescribed plane, so the shear stress-displacement response and dilation of the assembly can be examined.

03Parametric study

Particle shape and grading

Particle size distribution and shape can be varied one at a time, something a laboratory programme can rarely do on a single material, to see how each changes strength and stiffness.

04Micromechanics

Fabric and force chains

Contact orientations and the network of strongly loaded contacts (force chains) are measured directly from the assembly, describing how load is carried at particle scale.

05Failure mechanisms

Shear localisation

Because every particle is tracked, the development of shear bands and the micromechanics of failure can be followed from the first rearrangement of grains.

06Large deformation

Granular flow and collapse

Large displacements, such as a collapsing granular column or a penetrating object, arise from particle motion without remeshing.

Simulating a triaxial test, in outline

A DEM triaxial test generates a particle assembly, applies a confining stress through boundaries, compresses it axially and records deviator stress and volumetric strain for comparison with the laboratory curve. The literature on DEM triaxial simulation centres on calibrating micro-parameters such as friction and stiffness, and on how the confining boundary or membrane is represented (see Widuliński et al., 2009 in the references). The same logic applies to direct shear: the micro-parameters are tuned until the simulated response matches the tests.

Comparison

DEM vs FEM for soils.

The two methods answer different questions. Finite element analysis treats soil as a continuum and is the standard for routine design; discrete element modelling treats it as particles and is chiefly used to understand mechanisms. They are sometimes coupled in research, as in the finite–discrete element work cited below.

Comparison of the finite element method and the discrete element method for soils
Finite element method (FEM)Discrete element method (DEM)
IdealisationContinuum divided into elements and nodesAssembly of discrete particles with contacts
Material behaviour comes fromA constitutive model applied to the continuumParticle properties and contact interactions; bulk response emerges
Discontinuities and large deformationNeed special treatment (interfaces, remeshing or large-strain formulations)Arise naturally from particle motion and contact changes
Scale of practical modelsFull-scale boundary-value problems and routine designSpecimens and limited regions; particle count and run time limit size
ParametersConstitutive parameters calibrated to testsMicro-parameters (such as friction and stiffness) usually calibrated against tests
Typical roleStandard for routine continuum designResearch and analysis of particle-scale mechanisms

The software

What GeoEQ DEM is.

Particle-scale simulation

GeoEQ DEM simulates how the particles of a soil or granular material interact, so the behaviour of the assembly can be studied directly.

A desktop tool for geotechnics

It is a desktop program with a geotechnical focus, made for soils and granular materials rather than industrial bulk handling.

Part of the GeoEQ lab

It sits alongside the other GeoEQ geotechnical tools, and next to the open-source geoeq library for Python.

Release path

2D now, 3D next.

GeoEQ DEM starts in 2D. The 2D version is releasing soon, and the 3D version is in development. No dates are announced.

2D releasing soon

2D first

In general, a 2D model needs far less computing than a 3D one and suits plane-strain and cross-section studies, which is why packaged DEM tools have long offered 2D versions. 2D is the first release of GeoEQ DEM.

3D in development

3D to follow

Real soil is three-dimensional, so a 3D version is in development. Follow the roadmap for updates; this page will be updated when there is more to say.

Other tools engineers use

Other discrete element software.

Several established programs exist for particle simulation. The descriptions below paraphrase each project’s own material, are not rankings, and no comparison with GeoEQ DEM is implied.

Sources

References and further reading.

Last updated 14 November 2026.

  1. Cundall, P. A., & Strack, O. D. L. (1979). A discrete numerical model for granular assemblies. Géotechnique, 29(1), 47–65. doi:10.1680/geot.1979.29.1.47
  2. O’Sullivan, C. (2011). Particulate Discrete Element Modelling: A Geomechanics Perspective. Spon Press (Taylor & Francis).
  3. Widuliński, Ł., Kozicki, J., & Tejchman, J. (2009). Numerical simulations of triaxial test with sand using DEM. Archives of Hydro-Engineering and Environmental Mechanics, 56(3–4), 149–172.
  4. Dang, H. K., & Meguid, M. A. (2013). An efficient finite–discrete element method for quasi-static nonlinear soil–structure interaction problems. International Journal for Numerical and Analytical Methods in Geomechanics (McGill University Geo Group). McGill Geo Group
  5. Discrete element method. Wikipedia overview of the method and its terminology. en.wikipedia.org

Direct answers

Questions about discrete element modelling.

The same answers appear in visible text and structured data. See also GeoEQ notes for geotechnical explainers.

What is the discrete element method?

The discrete element method (DEM) is a numerical method that represents a material as an assembly of individual particles, tracks the contacts between them and integrates their motion over time. It was introduced for granular assemblies by Cundall and Strack (1979), Géotechnique 29(1): 47–65, https://doi.org/10.1680/geot.1979.29.1.47.

Who developed the discrete element method?

Peter Cundall and Otto Strack published the method for granular assemblies in 1979. Their paper, “A discrete numerical model for granular assemblies”, appeared in Géotechnique 29(1): 47–65.

How is DEM different from FEM for soils?

FEM treats soil as a continuum divided into a mesh, while DEM treats it as particles with contacts, so discontinuities and large deformation arise naturally from particle motion. FEM remains the standard for routine continuum design, and the two are sometimes coupled in research (for example the finite–discrete element work of Dang and Meguid, 2013).

How does DEM simulate a triaxial test?

A particle assembly is generated, confining stress is applied through boundaries, the specimen is loaded axially, and deviator stress and volumetric strain are recorded and compared with laboratory results. Micro-parameters are typically calibrated against test data; Widuliński et al. (2009) give a sand example.

What is DEM used for in geotechnical engineering?

It is used for research and analysis of element-test behaviour (triaxial, direct shear), the effects of particle shape and grading, fabric and force chains, and failure mechanisms. O’Sullivan (2011), Particulate Discrete Element Modelling: A Geomechanics Perspective, is the standard book-length reference.

Is DEM the same as a digital elevation model?

No. Both are abbreviated DEM, but on this page DEM means the discrete element method, a particle simulation technique for soils and granular materials.

What is the difference between discrete element and distinct element?

The two terms are used for the same family of particle-based methods, and some software vendors prefer “distinct-element”. Some authors reserve “distinct” for the deformable-block formulation used in rock mechanics, so check the definition an author uses.

What is GeoEQ DEM?

GeoEQ DEM is discrete element modelling software for soils and granular materials. It simulates how particles interact so the behaviour of the assembly can be studied directly. It is a desktop tool from the GeoEQ research lab; 2D is releasing soon and 3D is in development.

Is GeoEQ DEM 2D or 3D?

Both are planned. The 2D version comes first and is releasing soon, and a 3D version is in development. No dates are announced on this page.

What are the limitations of DEM?

Particle count and computing time limit the size of the specimen or region that can be modelled, parameters generally need calibration, and DEM is not suited to structural elements that behave as continua. These limits are why DEM is often coupled with continuum methods in research.

Why start with a 2D discrete element model?

In general, 2D reduces computing cost and suits plane-strain and cross-section studies, which is why packaged DEM tools have long offered 2D versions. For GeoEQ DEM, 2D is the first release and 3D is in development.

Does DEM replace laboratory testing?

No. DEM simulates idealised particle assemblies and is typically calibrated against, and compared with, laboratory tests. It adds insight into particle-scale behaviour; it does not remove the need to test the soil.

GeoEQ DEM

Particles first. Behaviour follows.

2D is releasing soon and 3D is in development. Ask to be told when it is released, or follow the roadmap.